PLASTCure Cast 100

A CASTABLE MATERIAL FOR THE MOST DEMANDING INDUSTRIAL MARKETS

Perfectly adapted for the manufacturing of lost-wax casting parts, PLASTCure Cast materials meet the high expectations concerning the treatment chain and offer a very low residual ash content.

Liquid-resin-Cast-100-material-3D-printing

KEY FEATURES & BENEFITS

AN IDEAL MATERIAL FOR PRINTING FOUNDRY PARTS

 

Specific features of PLASTCure Cast 100 :

  • High reactivity and low viscosity
  • High green strenght, excellent dimensional stability
  • Excellent burn out properties and low residue content
  • Can be placed directly into 800°C

PLASTCure Cast 100 TECHNICAL SPECIFICATION*

Appearance
Red translucent
Liquid density (g/cm3)
1.10
Viscosity @ 28°C (cps)
100 - 300
Hardness (Shore D)
85 - 90
Tensile Strength (MPa) ASTM D638
N.A
Strain at Break (%) ASTM D638
N.A
Tensile Modulus (MPa) ASTM D638
N.A
Flexural Strength (MPa) ASTM D790-10
90 - 100
Elongation at Break (%) ASTM D790-10
5 - 6
Flexural Modulus (MPa) ASTM D790-10
2300 - 2500
Izod Impact (J/m) ASTM D256A
N.A
HDT@ 0.46 Mpa (C°) ASTM D648
N.A
Residual ash content
< 2%
Water Absorption (%) ASTM D570
N.A

Our compatible promaker printers

PLASTCure Cast 100 is compatible with all our ProMaker L series printers

A LARGE RANGE OF PREMIUM MATERIAL
  • Innovation and expertise
  • Quality control
  • Key partnerships
  • A wide range of possibilities

*Preliminary data. Performance characteristics of these materials may change according to product application, operating conditions, material combined or end use.

See also

PLASTCure Cast 200
3D printed ring model for jewelry lost wax casting
More
PLASTCure Pattern 2500
3D-printing-material-industrial-investment-casting-ABS-3650
More
Want to know more ?