PLASTCure Cast 200

A CASTABLE MATERIAL FOR THE MOST DEMANDING INDUSTRIAL MARKETS

Perfectly adapted for the manufacturing of lost-wax casting parts, PLASTCure Cast materials meet the high expectations concerning the treatment chain and offer a very low residual ash content.

3D printed ring model for jewelry lost wax casting

KEY FEATURES & BENEFITS

AN IDEAL MATERIAL FOR PRINTING FOUNDRY PARTS  

 

Specific features of PLASTCure Cast 200 :

  • Good reactivity and low viscosity
  • High accuracy
  • Ability to produce sharp-edged parts
  • Outstanding burnout properties with nearly zero ash content

PLASTCure Cast 200 TECHNICAL SPECIFICATION*

Appearance
Orange translucent
Liquid density (g/cm3)
1.11
Viscosity @ 28°C (cps)
200 - 400
Hardness (Shore D)
85 - 90
Tensile Strength (MPa) ASTM D638
N.A
Strain at Break (%) ASTM D638
N.A
Tensile Modulus (MPa) ASTM D638
N.A
Flexural Strength (MPa) ASTM D790-10
65 - 75
Elongation at Break (%) ASTM D790-10
5 - 6
Flexural Modulus (MPa) ASTM D790-10
1400 - 1800
Izod Impact (J/m) ASTM D256A
N.A
HDT@ 0.46 Mpa (C°) ASTM D648
N.A
Residual ash content
No residue
Water Absorption (%) ASTM D570
N.A

Our compatible promaker printers

PLASTCure Cast 200 is compatible with all our ProMaker L series printers

A LARGE RANGE OF PREMIUM MATERIAL
  • Innovation and expertise
  • Quality control
  • Key partnerships
  • A wide range of possibilities

*Preliminary data. Performance characteristics of these materials may change according to product application, operating conditions, material combined or end use.

See also

PLASTCure Cast 100
Liquid-resin-Cast-100-material-3D-printing
More
PLASTCure ABS 3650
3D-printing-material-industrial-investment-casting-ABS-3650
More
Want to know more ?