IMPORTANT
The Prodways Hotline is exclusively reserved for users of Prodways ProMaker printers who need technical assistance.
Do you need technical assistance for your ProMaker printer?
PP 1200
POLYPROPYLENE FOR SELECTIVE LASER SINTERING
PolyPropylene is a well-known, versatile plastic, with interesting properties that makes it unique, and in some cases a convenient alternative to PA12.
KEY FEATURES & BENEFITS
- Extremely easy to process, 136°C melting point
- Suitable for applications that requires ductility, like snap-fits or living hinges
- 10% lighter than PA12
- High chemical resistance
- Low friction coefficient
- Suitable for small to big parts
- 25% lower purchase price than PA12
- Lower refresh rate than PA12 (that gives an extra economical advantage)
Appearance
White/translucent
Average particle size
70µm
Bulk Density
0.33 g/cm3
Density of parts
0.89 g/cm3
Moisture absorption
N.A
Melting Point
136°C
Heat Deflection 1.8 MPa
53°C
Tensile Strength
28 MPa
Tensile Modulus
1250 MPa
Elongation @ break
25%
Flexural Modulus
1150 MPa
Impact Strength (unnotched Izod)
25 KJ/m2
Shore Test
72 Shore D
Our compatible promaker printers
- ProMaker P2000 HT
- ProMaker P2000 ST
- ProMaker P4500 SD
- ProMaker P4500 HS
- ProMaker P4500 X
- ProMaker P4500 HT
A LARGE RANGE OF PREMIUM MATERIAL
- Innovation and expertise
- Quality control
- Key partnerships
- A wide range of possibilities
- * Performance characteristics of these materials may change according to product application, operating conditions, material combined or end use
Want to know more ?
Get a quote
