PLASTCure Cast 300 HD

A CASTABLE MATERIAL FOR THE MOST DEMANDING INDUSTRIAL MARKETS

Perfectly adapted for the manufacturing of lost-wax casting parts, PLASTCure Cast materials meet the high expectations concerning the treatment chain and offer a very low residual ash content.

KEY FEATURES & BENEFITS

AN IDEAL MATERIAL FOR INVESTMENT CASTING OF ACCURATE AND THIN PARTS

Specific features of PLASTCure Cast 300 HD:

  • High accuracy allowing very thin details
  • Outstanding burnout properties with nearly zero ash content

PLASTCure Cast 300 HD TECHNICAL SPECIFICATION*

Appearance
Orange translucent
Liquid density (g/cm3)
1.10
Viscosity @ 28°C (cps)
300 - 500
Hardness (Shore D)
70 - 75
Tensile Strength (MPa) ASTM D638
N/A
Strain at Break (%) ASTM D638
> 10
Tensile Modulus (MPa) ASTM D638
N/A
Flexural Strength (MPa) ASTM D790-10
40 - 50
Elongation at Break (%) ASTM D790-10
N/A
Flexural Modulus (MPa) ASTM D790-10
800 - 1200
Izod Impact (J/m) ASTM D256A
N/A
HDT@ 0.46 Mpa (C°) ASTM D648
N/A
Residual ash content
No residue
Water Absorption (%) ASTM D570
N/A

Our compatible promaker printers

PLASTCure Cast 300 HD is compatible with all our ProMaker L series printers and ProMaker LD series printers

A LARGE RANGE OF PREMIUM MATERIAL
  • Innovation and expertise
  • Quality control
  • Key partnerships
  • A wide range of possibilities

*Preliminary data. Performance characteristics of these materials may change according to product application, operating conditions, material combined or end use.

See also

PLASTCure Cast 100
More
PLASTCure Cast 200
3D printed ring model for jewelry lost wax casting
More
PLASTCure ABS 2800
3D printed thermomecanical part in ABS
More
Want to know more ?